Benchmarks/EFE-98/Dishwasher Load Plates

Dishwasher Load Plates

EFE-98BiGym 2.0
Robot
Unitree G1
Trials
1
Time limit
1 h 00 min

Take the plates from the dish rack and gently slot them into the dishwasher's lower rack.

Official Embodied First Exam clip · 2.2× speedSource ↗
SuccessPass/fail

Pass or fail: the simulator checks the goal described above.

Full criteria and notes
Full success check
The episode succeeds when the following has held for 1 s (50 control steps in a row): each of the two plates stands on edge in the dishwasher's lower rack: its face toward your left or right (its axis within 20 degrees of the robot's left or right at the start), touching the lower rack, held by neither gripper; both plates at once. Held means that a finger of the gripper touches the object (BiGym's is gripper holding object): an open gripper still resting against it holds it. A plate touching the floor ends the episode as a failure. The robot must not fall at any time: a fall (the pelvis tilted more than about 53 degrees from upright, or lower than 0.30 m) makes the episode a failure, but does not end it.
Scoring
A simulator error or a missing result counts as a fail.
Trials
1 graded attempt per test (standard mode: one live episode, no replay).

Task definition ↗ · All EFE-98 tasks