Move Two Plates
- Robot
- Unitree G1
- Trials
- 1
- Time limit
- 1 h 00 min
Take both plates out of the left dish rack and gently stand them in the right dish rack.
Official Embodied First Exam clip · 2.1× speedSource ↗
SuccessPass/fail
Pass or fail: the simulator checks the goal described above.
Full criteria and notes
- Full success check
- The episode succeeds when the following has held for 1 s (50 control steps in a row): each plate stands in a slot of the right-hand rack: its centre within 0.05 m of one of that rack's six slot points, standing on edge with its face toward your right (its axis within 20 degrees of the robot's right at the start, as the plates stand now; a plate turned around does not count), touching the right-hand rack, not touching the table, held by neither gripper; both plates at once. Held means that a finger of the gripper touches the object (BiGym's is gripper holding object): an open gripper still resting against it holds it. A plate touching the floor ends the episode as a failure. The robot must not fall at any time: a fall (the pelvis tilted more than about 53 degrees from upright, or lower than 0.30 m) makes the episode a failure, but does not end it.
- Scoring
- A simulator error or a missing result counts as a fail.
- Trials
- 1 graded attempt per test (standard mode: one live episode, no replay).
EFE-98