Stool Brace Insert
- Robot
- Sharpa Wave hand
- Trials
- 1
- Time limit
- 1 h 00 min
With one dexterous hand (Sharpa Wave by default, or Wuji Hand 2.2) on a six-axis wrist stage, pick up the loose cross brace of an ODDVAR-style pine stool dry frame, stand it in the empty bore of the lower side frame, then lift the opposite side frame onto all four upper dowels so both brace dowels are seated in their legs; drops, knocked rails or a displaced frame fail at once.
Official Embodied First Exam clip · 2.1× speedSource ↗
SuccessPass/fail
After stage 4 the assembled condition holds with no hand contact on any frame or rail and every part's centre-of-mass speed at most 0.02 m/s and angular speed at most 0.2 rad/s for 50 consecutive controls; the episode then ends.
Full criteria and notes
- Full success check
- Success: after stage 4 the assembled condition holds with no hand contact on any frame or rail and every part's centre-of-mass speed at most 0.02 m/s and angular speed at most 0.2 rad/s for 50 consecutive controls (1 s); the episode then ends. A single seated brace dowel or any partial assembly never counts. The episode ends immediately with failure, checked after every 2 ms physics substep, when the lower frame moves more than 0.03 m or tilts more than 10 degrees; a pre-seated rail is pulled to less than 8 mm in its bore or tilts more than 10 degrees; the brace touches the table after stage 1, or its centre drops below 0.09 m above the table top after stage 1; the brace tilts more than 20 degrees after stage 2; the opposite side frame touches the table after stage 3 or tilts more than 20 degrees from its upside-down carrying orientation after stage 3
- Scoring
- A simulator error or a missing result counts as a fail.
- Trials
- 1 graded attempt per test (standard mode: one live episode, no replay).
EFE-98