Benchmarks/EFE-98/Aloha Single Peg Insertion

Aloha Single Peg Insertion

EFE-98MuJoCo Playground
Robot
ALOHA 2, two-arm
Trials
1
Time limit
1 h 00 min

Pick up the socket with one arm and the peg with the other, lift both, and insert the peg's end into the socket's open end. This is MuJoCo Playground's AlohaSinglePegInsertion, run here in plain MuJoCo; the peg and socket positions are randomized as in Playground, with a fixed seed.

Official Embodied First Exam clip · 3.8× speedSource ↗
SuccessPass/fail

Pass or fail: the simulator checks the goal described above.

Full criteria and notes
Full success check
At the end of the trajectory the peg's tip (site peg_end2) is within 5 mm of the socket's axis (the line through sites socket rear and socket entrance) and inside the socket, at least 12 mm from its open end: the axial parameter t is in [-0.875, 0.75], where t = 0 at socket rear (the middle of the tube), t = 1 at socket entrance (the open end; 48 mm per unit of t) and t = -0.833 at the inner face of the red rear wall (the cavity is 88 mm deep; the lower bound leaves 2 mm for the contact's give). A peg pushed all the way in counts. The service applies exactly this rule.
Scoring
A simulator error or a missing result counts as a fail.
Trials
1 graded attempt per test (standard mode: one live episode, no replay).

Task definition ↗ · All EFE-98 tasks